Knowledge Base

Spillages on the Vantify CAFM App

Spillages on the Vantify CAFM App


The Vantify CAFM app gives you the ability to log, and close down spillages, all in the palm of your hand.


From the dashboard, tap more, then spillages.



This will show you a list of all spillages created today (it's ok for there to be none), but use the filters to change your date range and other useful filters:



Tap Add to start a new spillage

Select your site, and enter a location



Fill in the form, providing a summary, longer optional description. Choose the type of spillage, and select a service provider to carry out the spillage (likely only your own service provider)




Choose an operative, but you can assign it to you if you’re going to complete down the spillage straightaway.

Also enter a reporter, which can also be you if it isn’t a member of the public or staff member.

If an accident occurred tap the box, and if you’ve heard there’s a spillage but you’re not nearby tap I am not near the spillage which removes the requirement for a photo.



Otherwise, if you are at the spillage, tap Take Photo, (approve the use of the camera if needed) and proceed to take and approve the photo



Tap report spillage




This will take you back to the spillage screen where you’ll see your spillage. Reopen it



Use the sub menu to navigate to workflow



From here you have options – add an action, job, or quote if further work is required.

Reassign it to someone else, cancel, or in our case here – accept the spillage (you can add further photos here if necessary).



Tap start



And now go ahead and clean up the spillage as it is now in progress



When it is clean, tap complete




Take a photo of the newly clean area, and if you need to raise an action, a quote or a job you can also do so at this point.




Otherwise tap complete and the spillage is Completed!