Creating Assets and Sub-Assets
Manual Method
Vantify CAFM provides access to an asset register, which in turn can be linked to reactive and PPMs. This guide explains how to create a new asset, and how to apply it to reactives and PPMs.
Adding a new asset
Adding a new asset is simple, go to the assets page in the left hand menu. This will present all the assets within the system, click add new asset to begin:
The resulting page presents a whole array of useful fields that can be applied to assets including make, model, serial number, installation date, warranty information, replacement costs etc. You do not need to populate every single field, but of course the more data you enter the more useful it will be for you.
The minimum requirements are:
Name – give your asset a name, usually a short description or identifier.
Site – choose which site it relates to
Status – set the asset to active
This is all you need to set up a new asset, but there are a few useful fields that can prove helpful when managing your equipment:
Service Provider
Specify which service provider looks after the equipment. All SPs will be able to see it, but only the specified one will be able to edit it.
Barcode
This is used for asset tagging, enter the code from your QR code or barcode in the barcode field. When you tag the code in the app, it will instantly bring up the information of the asset linked by this code. It’s surprisingly low tech. NFC tagging is also available, but this is covered in a separate guide.
The code to the left is simply a digital representation of 123456 (go ahead and test it by scanning with your camera!), enter 123456 in the asset barcode field and it will automatically filter to this asset.
Service Routine
These are the SFG-20 codes that your asset is linked with, and it allows the operative to access the maintenance instructions when carrying out the job. It presents each instruction for the asset, along with the frequency of the line:
Asset scoring and replacement costs
When the engineer carries out the task they can be asked to rate the asset in terms of condition and risk (as well as other bespoke expandable options such as public imagine or pass/fail) which is then collated in the historical scores section. It is especially useful for budgeting, on a quarterly basis filter to poor quality assets and along with the replacement costs, it’ll aid in budgeting for replacing the item.
When you’ve populated everything you need, press create.
Adding additional details
You’ll be taken straight in to the asset, within which you are presented a host of further sub menus:
Sub Asset – a list of sub assets for this parent asset. For example the asset itself may be called “pumps” and this could have a list of the individual pumps listed. You can use the sub assets for asset tagging and for logging reactive jobs.
Service Routines – SFG-20, this will present the service routines for the engineer, who will be able to see the suggested maintenance steps for maintaining the item.
Historical scores – assets can be scored by the engineer when carrying out the job. The standards out of the box are condition and risk but others can be added. This is a collation of these scores.
Tasks – this is a list of the PPM tasks that link with this asset.
Forms – you can create forms that apply to an asset, fill these out from this section.
Related files – any files on jobs that linked to this asset.
Asset files – a useful area where you can store asset files such as instruction manuals of warranties.
You can also scroll to the bottom of the page where you can add an asset image.
Adding sub assets
You can add sub assets to the system, as mentioned above such as pumps, or parts of an asset. And adding them is very straightforward.
Go to the sub assets sub menu:
And click Add
The form is the exact same one for adding a main asset, so add the details and click create. This will add a list of sub assets which can then be used to raise reactive jobs.
Applying the asset to reactive jobs
Now the asset is created you can apply it to reactive jobs. There are a few ways to do this:
1. When logging a reactive job as normal, when getting to the asset field, choose the relevant piece of equipment from the dropdown menu:
2. Use the asset tag – scan the QR code or NFC tag and it will bring up the asset on the app. You can then click add new job from the asset page
3. The service provider can add an asset at the end of the job during completion.
Applying the asset to PPMs
When importing PPM using the spreadsheet template, simply enter the asset name and reference in the asset fields. If it finds one on the system that matches it will reuse the existing asset, otherwise it will create a new one.
If creating a task manually ensure you choose “hard” as the task type and select from the dropdown to add the asset.
Also note, when creating a new task, you can also add a new asset at the same time:
Related Guides
Vantify CAFM Support
For further assistance on anything covered in this guide or others, please contact the Vantify admin team on 01480 499740 or helpdesk.cafm@vantify.com.
This guide was created by Vantify's Product Team and reflects the latest updates as of the specified date. Please note that the information provided may evolve with future system updates or changes. Additionally, some details may vary based on your specific user permissions and account settings within Vantify.