Knowledge Base

Moving a PPM using drag and drop

Moving a PPM date within Vantify CAFM is now straightforward and can be done from the Generate Planner section.



Simply drag the frequency of the PPM to the desired week and drop it in place. (sometimes it doesn't quite snap into place, so in that instance just try again)



What would you like to edit?

It will ask if you would like to change just this occurrence, or all events in the frequency.

You may also be informed that any existing jobs will be cancelled as you are changing the frequency and overwriting the existing jobs.

Add a reason for the change which will be sent to the approver and subsequently added as the cancellation note for the previous jobs.




Just this occurence

A single, yellow box will appear indicating you have created a one off ad-hoc event, click the box to decide which day it will fall on




All events in the frequency

By selecting all events in the frequency it will create multiple amber tasks that will run until the end date. If you left the end date blank it will run indefinitely.




Note - frequencies follow a rule!

Tasks all have a rule, such as last weekday, first Monday, 15th of the month. And the system will honour these rules when dragging and dropping.



For the example above, the 3M drainage is set with a rule of last weekday of the month, so dragging it to the middle of the month will snap to the last weekday, honouring the rule.


Multiple frequencies on one row

You can also move frequencies when there are multiple frequencies on the row.

For example 1M, 3M and 6M.

Dragging the 1M will only move the 1M version of the frequency, and if there is already a higher frequency in place such as a 6M or 3M in the specified week it will be ignored as the higher one will take priority.


Using the handy show drafts toggle

You can use the handy toggle to show drafts, this turns off all existing tasks only showing your changes. This makes visualising what you are working on much easier and can be quickly toggled on and off.


Setting an end date

While editing you can set an end date for the task. For example, if a weekly was only required for a short period of time you can specify a start and end date for this task. The example in the image above is a weekly that we only want to run from mid august to the end of September.

All you need to do when editing the task is set the end date and it will run between the start and end dates specified.


Submitting for approval

Once you have completed your edits you are ready to submit for approval.

There are two options - submitting selected lines for approval, or submitting all filtered for approval.


Submitting selected lines (image above)

Tick the boxes in the left hand column of the lines you want to submit, then at the bottom click send for approval. Note - this only works on an individual page and cannot go over two pages.


Submitting all filtered

Clicking send all filtered for approval will send any draft tasks on any page to the approver for approval.



Related Guides

CAF-N-417

CAF-N-419

CAF-N-420

CAF-N-421

CAF-N-422

CAF-N-423

CAF-N-426

CAF-N-427

CAF-N-428

CAF-N-429

CAF-N-436

CAF-N-451



Vantify CAFM Support

For further assistance on anything covered in this guide or others, please contact the Vantify admin team on 01480 499740 or helpdesk.cafm@vantify.com.

This guide was created by Vantify's Product Team and reflects the latest updates as of the specified date. Please note that the information provided may evolve with future system updates or changes. Additionally, some details may vary based on your specific user permissions and account settings within Vantify.