Knowledge Base

Dashboard - Maintaining your dashboard performance statistics on Vantify CAFM (Traffic Lights)

A Service Providers Guide to Maintaining a Good Performance on Vantify CAFM

(Maintaining your dashboard performance statistics on Vantify CAFM (Traffic Lights))


Introduction


As a service provider who utilises the Vantify CAFM system for one or more of your clients, you will already be familiar with the below performance statistics. This can be seen right at the bottom of the dashboard screen.


This is where we let you know how well you are performing in comparison to your peers and your client sees this too.


Clicking on any of these traffic lights will take you to the list of service providers you may have access to (likely only one) click view and then performance stats:






The statistics on the left hand side show your performance, the ones on the right are the average performance of all other service providers who work for your client



This guide is designed to take you through each of the above scoring sections step by step to show you how the performance statistics are reached, and what you can do to make sure it is an accurate reflection of the work you are doing for your client.


Reactive Job Updates


Here we are monitoring how well you communicate with your clients in terms of notes applied on jobs to keep all parties updated.


What are we actually measuring?


Your dashboard has a widget which has been specifically created to let you know that we would like to hear from you. The ‘Updates Due’ (Below, red), or Reactive attendance and completion overdue (Below, blue) will automatically display any job that needs updating by midnight that day.



We aren’t expecting all jobs to be completed here… just for you to let us know what’s happening… even if nothing’s happening. If a tenant was to call the Vantify service desk asking for an update and there hadn’t been one for 3 weeks we have little to inform them, by the system requiring regular updates we have something to present to them.


Formula


If ‘Action Required By’ date (below, red) is earlier than current date = Fail

If ‘Action Required By’ date (below, red) is later than current date = Pass



How do I achieve this?


Log into your Vantify CAFM on a daily basis and ensure that you apply an update on every reactive job until the updates due shows no more jobs requiring update.



What happens if I don’t do this?


If you have not applied an update by the due date, you will receive an email from us requesting that you update. If you still fail to apply an update we will send a further email chase. If an update is still not applied, we will telephone you and you will then enter an escalation process whereby we will report back to the client that you are failing to update Vantify CAFM.


Reactive Attendance Achieved


Here, we are measuring how many jobs you manage to attend within the time frame specified by your client.


What are we actually measuring?


What we are looking for here is that the date entered into the ‘On Site Date’ box Below, is on or before the ‘Attendance Due’ date on the job (below in BLUE)





Where A = First Attendance and B = Attend Due


Formula

If A is earlier than or equal to B = Pass

If A is later than B = Fail



How do I achieve an accurate reflection of this?


Desktop Users: When your engineer arrives on site, they will need to let you know so that you can enter this information correctly and promptly into the on site date box.


App Users: When arriving on site, simply open the job and commence the job. The app will update with a time and date stamp which will populate this information on the job.


So long as the jobs are commenced before the attendance due, you will get a positive score.



Reactive Completion Achieved


Here, we are measuring how many jobs you manage to complete within the time frame specified by your client.


What are we actually measuring?


What we are looking for here is that the date entered into the ‘Completion Date’ box below, is on or before the ‘Completion Due’ date on the job (below in blue)




Where A = Completion Date and B = Completion Due


Formula

If A is earlier than or equal to B = Pass

If A is later than B = Fail



How do I achieve an accurate reflection of this?


Desktop Users: When your engineer has completed the job, they will need to let you know so that you can enter this information correctly and promptly into the completion date box.

App Users: When arriving on site, simply open the job and complete the job. The app will update with a time and date stamp which will populate this information on the job.


So long as the jobs are completed before the completion due, you will get a positive score.



PPM Updates Achieved


Here we are monitoring how well you communicate with your clients in terms of notes applied on jobs to keep all parties updated



What are we actually measuring?


Your Vantify CAFM Dashboard has a widget which has been specifically created to let you know when we would like to hear from you. The ‘Updates Due’ tab (below, red) will automatically display any job that needs updating by midnight that day. In addition to this the planned jobs overdue widget (Below, blue) shows which jobs are overdue.



We aren’t expecting all jobs to be completed here… just for you to let us know what’s happening… even if nothings happening.



Formula


If ‘Action required by (below, red) is earlier than current date = Fail

If ‘Action required by (below, red) is later than current date = Pass




How do I achieve this?


Desktop Users: log into your Vantify CAFM on a daily basis and ensure that you apply and update on every Planned job until the widget (below, red) shows no more jobs requiring update.



What happens if I don’t do this?


If you have not applied an update by the due date, you will receive an email from us requesting that you update. If you still fail to apply an update we will send a further email chase. If an update is still not applied, we will telephone you and you will then enter an escalation process whereby we will report back to the client that you are failing to update Vantify CAFM.


PPM Complete


Here we are monitoring how many of your planned tasks you complete by their required due date


What are we actually measuring?


Within the jobs page of Vantify CAFM is a handy search tool that will allow you to search for any jobs due to be completed within the next week, month etc. The below is showing for planned jobs, that are due for completion within the next 2 weeks.



What we are looking for here is for the completion date that you enter (below, red), to be earlier than the ‘Completion Due’ date on the job (below, blue).





Where A = Completion Date and B = Attend Due/Complete Due


Formula


If A is earlier than or equal to B = Pass

If A is later than B = Fail


How do I achieve an accurate reflection of this?

Desktop Users: When your engineer has completed the works, they will need to let you know so that you can enter this information correctly and promptly into the completion date box.


App Users: Upon completing the job, simply open the job and press the ‘Complete’ button and enter a date and time. The app will update with a time and date stamp which will populate this information on the job.


Quote SLAs achieved


Here we are monitoring the quotes uploaded to the system and if they have met the timeframe SLAs set by your client.


What are we actually measuring?


Your dashboard has a widget which has been specifically created to let you know when we would like to hear from you. The widget shows you all Quotes that need updating by midnight tonight.


This one is nice and simple, all we are measuring here is the length of time between the ‘Completion Due at (below, blue) and the date that you submit your quote (below, red)



As long as your average turnaround isn’t longer than everyone else’s average – you’re in the green!


KPI Surveys


NOTE – Not all Vantify clients use KPI Surveys. If your statistic is N/A you can disregard this section.


Here we are monitoring the average FM KPI score in the previous calendar month.


To stay on top of your KPIs simply use the Vantify CAFM dashboard widget to submit any outstanding KPIs. The statistic is based on the score you submit on your KPI survey.



Finally – what if I have an N/A?


If you have an N/A in any of these boxes it means you haven’t had an entry in the past 30 days, in our instance below, no jobs were logged to this site, no PPM was due, no quotes were requested and no KPIs were required. So there's nothing to worry about.




Vantify CAFM Support

For further assistance on anything covered in this guide or others, please contact the Vantify admin team on 01480 499740 or helpdesk.cafm@vantify.com.

This guide was created by Vantify's Product Team and reflects the latest updates as of the specified date. Please note that the information provided may evolve with future system updates or changes. Additionally, some details may vary based on your specific user permissions and account settings within Vantify.